papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software

Tobias Peter Scheipel; Marcel Carsten Baunach

doi:10.5220/0009159701360141

papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software

Tobias Peter Scheipel, Marcel Carsten Baunach

Institute of Technical Informatics (4480)

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Abstract

Embedded systems development usually starts with hardware engineering based on specific requirements of the systems. These requirements are mainly derived from the needs of the not yet developed software to be executed on the system. This process is predictive and many iterations are thus needed, as new requirements often arise during the software development period. In the future, the market will demand more and more sophisticated embedded systems with a much reduced time to market. It will thus be inevitable that system prototypes and series products will need to be created as fast as possible. To enable this, we propose a top-down approach termed papagenoX, dealing with the question of “How to generate all layers X of the embedded systems stack including hardware and reconfigurable logic units from application software?”. The present work is a work in progress and deals with the definition of the research questions and several ideas and concepts of how to fundamentally solve them. Hence, it aims at introducing ideas to create a generator for embedded systems electronics, reconfigurable logic and software.

Original language	English
Title of host publication	SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks
Editors	Nirwan Ansari, Andreas Ahrens, Cesar Benavente-Peces
Publisher	INSTICC – Institute for Systems and Technologies of Information, Control and Communication
Pages	136-141
Number of pages	6
Volume	1
ISBN (Electronic)	978-989-758-403-9
DOIs	https://doi.org/10.5220/0009159701360141
Publication status	Published - 28 Feb 2020
Event	9th International Conference on Sensor Networks: SENSORNETS 2020 - Valletta, Malta Duration: 28 Feb 2020 → 29 Feb 2020 Conference number: 9 http://sensornets.org/

Publication series

Name	SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks

Conference

Conference	9th International Conference on Sensor Networks
Abbreviated title	SENSORNETS 2020
Country/Territory	Malta
City	Valletta
Period	28/02/20 → 29/02/20
Internet address	http://sensornets.org/

Keywords

Embedded Systems
Printed Circuit Board
Design Automation
Hardware/Software Co-design
Systems Engineering
Reconfigurable Logic

ASJC Scopus subject areas

Information Systems
Electrical and Electronic Engineering
Computer Networks and Communications
Computer Science Applications

Access to Document

10.5220/0009159701360141Licence: CC BY-NC-ND 4.0

Cite this

Scheipel, T. P., & Baunach, M. C. (2020). papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software. In N. Ansari, A. Ahrens, & C. Benavente-Peces (Eds.), SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks (Vol. 1, pp. 136-141). (SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks). INSTICC – Institute for Systems and Technologies of Information, Control and Communication. https://doi.org/10.5220/0009159701360141

papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software. / Scheipel, Tobias Peter ; Baunach, Marcel Carsten.
SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks. ed. / Nirwan Ansari; Andreas Ahrens; Cesar Benavente-Peces. Vol. 1 INSTICC – Institute for Systems and Technologies of Information, Control and Communication, 2020. p. 136-141 (SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks).

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

Scheipel, TP & Baunach, MC 2020, papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software. in N Ansari, A Ahrens & C Benavente-Peces (eds), SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks. vol. 1, SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks, INSTICC – Institute for Systems and Technologies of Information, Control and Communication, pp. 136-141, 9th International Conference on Sensor Networks, Valletta, Malta, 28/02/20. https://doi.org/10.5220/0009159701360141

Scheipel TP , Baunach MC. papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software. In Ansari N, Ahrens A, Benavente-Peces C, editors, SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks. Vol. 1. INSTICC – Institute for Systems and Technologies of Information, Control and Communication. 2020. p. 136-141. (SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks). doi: 10.5220/0009159701360141

Scheipel, Tobias Peter ; Baunach, Marcel Carsten. / papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software. SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks. editor / Nirwan Ansari ; Andreas Ahrens ; Cesar Benavente-Peces. Vol. 1 INSTICC – Institute for Systems and Technologies of Information, Control and Communication, 2020. pp. 136-141 (SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks).

@inproceedings{8549b53cf77944cfab23902cdb7e51f6,

title = "papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software",

abstract = "Embedded systems development usually starts with hardware engineering based on specific requirements of the systems. These requirements are mainly derived from the needs of the not yet developed software to be executed on the system. This process is predictive and many iterations are thus needed, as new requirements often arise during the software development period. In the future, the market will demand more and more sophisticated embedded systems with a much reduced time to market. It will thus be inevitable that system prototypes and series products will need to be created as fast as possible. To enable this, we propose a top-down approach termed papagenoX, dealing with the question of “How to generate all layers X of the embedded systems stack including hardware and reconfigurable logic units from application software?”. The present work is a work in progress and deals with the definition of the research questions and several ideas and concepts of how to fundamentally solve them. Hence, it aims at introducing ideas to create a generator for embedded systems electronics, reconfigurable logic and software.",

keywords = "Embedded Systems, Printed Circuit Board, Design Automation, Hardware/Software Co-design, Systems Engineering, Reconfigurable Logic",

author = "Scheipel, \{Tobias Peter\} and Baunach, \{Marcel Carsten\}",

year = "2020",

month = feb,

day = "28",

doi = "10.5220/0009159701360141",

language = "English",

volume = "1",

series = "SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks",

publisher = "INSTICC – Institute for Systems and Technologies of Information, Control and Communication",

pages = "136--141",

editor = "Nirwan Ansari and Andreas Ahrens and Cesar Benavente-Peces",

booktitle = "SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks",

note = "9th International Conference on Sensor Networks : SENSORNETS 2020, SENSORNETS 2020 ; Conference date: 28-02-2020 Through 29-02-2020",

url = "http://sensornets.org/",

}

TY - GEN

T1 - papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software

AU - Scheipel, Tobias Peter

AU - Baunach, Marcel Carsten

N1 - Conference code: 9

PY - 2020/2/28

Y1 - 2020/2/28

N2 - Embedded systems development usually starts with hardware engineering based on specific requirements of the systems. These requirements are mainly derived from the needs of the not yet developed software to be executed on the system. This process is predictive and many iterations are thus needed, as new requirements often arise during the software development period. In the future, the market will demand more and more sophisticated embedded systems with a much reduced time to market. It will thus be inevitable that system prototypes and series products will need to be created as fast as possible. To enable this, we propose a top-down approach termed papagenoX, dealing with the question of “How to generate all layers X of the embedded systems stack including hardware and reconfigurable logic units from application software?”. The present work is a work in progress and deals with the definition of the research questions and several ideas and concepts of how to fundamentally solve them. Hence, it aims at introducing ideas to create a generator for embedded systems electronics, reconfigurable logic and software.

AB - Embedded systems development usually starts with hardware engineering based on specific requirements of the systems. These requirements are mainly derived from the needs of the not yet developed software to be executed on the system. This process is predictive and many iterations are thus needed, as new requirements often arise during the software development period. In the future, the market will demand more and more sophisticated embedded systems with a much reduced time to market. It will thus be inevitable that system prototypes and series products will need to be created as fast as possible. To enable this, we propose a top-down approach termed papagenoX, dealing with the question of “How to generate all layers X of the embedded systems stack including hardware and reconfigurable logic units from application software?”. The present work is a work in progress and deals with the definition of the research questions and several ideas and concepts of how to fundamentally solve them. Hence, it aims at introducing ideas to create a generator for embedded systems electronics, reconfigurable logic and software.

KW - Embedded Systems

KW - Printed Circuit Board

KW - Design Automation

KW - Hardware/Software Co-design

KW - Systems Engineering

KW - Reconfigurable Logic

UR - http://www.scopus.com/inward/record.url?scp=85082989951&partnerID=8YFLogxK

U2 - 10.5220/0009159701360141

DO - 10.5220/0009159701360141

M3 - Conference paper

VL - 1

T3 - SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks

SP - 136

EP - 141

BT - SENSORNETS 2020 - Proceedings of the 9th International Conference on Sensor Networks

A2 - Ansari, Nirwan

A2 - Ahrens, Andreas

A2 - Benavente-Peces, Cesar

PB - INSTICC – Institute for Systems and Technologies of Information, Control and Communication

T2 - 9th International Conference on Sensor Networks

Y2 - 28 February 2020 through 29 February 2020

ER -

papagenoX: Generation of Electronics and Logic for Embedded Systems from Application Software

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Embedded Operating Systems

Reconfigurable Processor Architectures

Embedded Automotive Systems