Skip to main navigation Skip to search Skip to main content

Influence of Position on Optoelectronic Strain Measurement Systems for Flywheels

Research output: Contribution to journal › Article › peer-review

Abstract

The main component of flywheel energy storage systems (FESS) is the flywheel rotor itself: a rotating mass which stores kinetic energy. Ongoing research in the field of FESS requires constant condition monitoring of the flywheel rotor, especially when new composite materials and flywheel rotor manufacturing methods are investigated. Optoelectronic strain measurement (OESM) is a method to contactlessly measure the flywheel rotor's radial deformation as well as its position in the radial plane via a special reflective pattern on the flywheel which is read via optical sensors. This letter presents a simulation model to estimate the influence of pattern offset and in-plane movement of the flywheel on an array of multiple sensors. The measurement values from multiple sensors can be fused to mitigate the influence of cross sensitivity between flywheel deformation and position measurements. The influence of out-of-plane movement on the measured values is evaluated via measurements on a test bench setup, where the sensor distance can be controlled by a stepper motor.

Original languageEnglish
Article number6005404
JournalIEEE Sensors Letters
Volume7
Issue number9
DOIs
Publication statusPublished - 1 Sept 2023

ASJC Scopus subject areas

  • Instrumentation
  • Electrical and Electronic Engineering

Keywords

  • flywheel
  • Sensor applications
  • strain measurement
  • uncertainty

Fingerprint

Dive into the research topics of 'Influence of Position on Optoelectronic Strain Measurement Systems for Flywheels'. Together they form a unique fingerprint.

Cite this