DC Measurement in HVAC-Systems: Status Quo and Recent Developments

P. Schachinger; D. Albert; A. Fröhlich; H. Renner; J. Mandl; P. Trampitsch; R. Klambauer; A. Bergmann; W. Schöffer

doi:10.1109/UPEC57427.2023.10294963

DC Measurement in HVAC-Systems: Status Quo and Recent Developments

P. Schachinger
, D. Albert
, A. Fröhlich
, H. Renner
, J. Mandl
, P. Trampitsch
, R. Klambauer
, A. Bergmann
, W. Schöffer

Research output: Contribution to conference › Paper › peer-review

Abstract

The measurement of small direct currents in presence of high AC currents on high voltage potential is a challenging task. Inductive current transducers (CT) are not able to measure DC and other non-conventional CTs are also not designed for DC. Therefore, DC measurements are done in transformer neutral points on ground potential. In this work, the state of the art on DC measurements in the high-voltage transmission grid is given, including the measurement in the transformer neutral point, the indirect measurement with the differential magnetometer method, and the indirect method of measuring a compensating current. In addition an optical current measurement system under development is presented.

Original language	English
Pages	1-5
Number of pages	5
DOIs	https://doi.org/10.1109/UPEC57427.2023.10294963
Publication status	Published - 2023
Event	58th International Universities Power Engineering Conference: UPEC 2023 - Dublin, Ireland Duration: 29 Aug 2023 → 1 Sept 2023

Conference

Conference	58th International Universities Power Engineering Conference
Abbreviated title	UPEC 2023
Country/Territory	Ireland
City	Dublin
Period	29/08/23 → 1/09/23

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

ASJC Scopus subject areas

Electrical and Electronic Engineering

Fields of Expertise

Sustainable Systems

Treatment code (Nähere Zuordnung)

Application

Access to Document

10.1109/UPEC57427.2023.10294963

Cite this

@conference{b26addf9b366491db615e239681775d1,

title = "DC Measurement in HVAC-Systems: Status Quo and Recent Developments",

abstract = "The measurement of small direct currents in presence of high AC currents on high voltage potential is a challenging task. Inductive current transducers (CT) are not able to measure DC and other non-conventional CTs are also not designed for DC. Therefore, DC measurements are done in transformer neutral points on ground potential. In this work, the state of the art on DC measurements in the high-voltage transmission grid is given, including the measurement in the transformer neutral point, the indirect measurement with the differential magnetometer method, and the indirect method of measuring a compensating current. In addition an optical current measurement system under development is presented.",

keywords = "Neutral Point Measurement, DC Bias, Faraday-Effekt, Current Measurement",

author = "P. Schachinger and D. Albert and A. Fr{\"o}hlich and H. Renner and J. Mandl and P. Trampitsch and R. Klambauer and A. Bergmann and W. Sch{\"o}ffer",

year = "2023",

doi = "10.1109/UPEC57427.2023.10294963",

language = "English",

pages = "1--5",

note = "58th International Universities Power Engineering Conference : UPEC 2023, UPEC 2023 ; Conference date: 29-08-2023 Through 01-09-2023",

}

TY - CONF

T1 - DC Measurement in HVAC-Systems: Status Quo and Recent Developments

AU - Schachinger, P.

AU - Albert, D.

AU - Fröhlich, A.

AU - Renner, H.

AU - Mandl, J.

AU - Trampitsch, P.

AU - Klambauer, R.

AU - Bergmann, A.

AU - Schöffer, W.

PY - 2023

Y1 - 2023

N2 - The measurement of small direct currents in presence of high AC currents on high voltage potential is a challenging task. Inductive current transducers (CT) are not able to measure DC and other non-conventional CTs are also not designed for DC. Therefore, DC measurements are done in transformer neutral points on ground potential. In this work, the state of the art on DC measurements in the high-voltage transmission grid is given, including the measurement in the transformer neutral point, the indirect measurement with the differential magnetometer method, and the indirect method of measuring a compensating current. In addition an optical current measurement system under development is presented.

AB - The measurement of small direct currents in presence of high AC currents on high voltage potential is a challenging task. Inductive current transducers (CT) are not able to measure DC and other non-conventional CTs are also not designed for DC. Therefore, DC measurements are done in transformer neutral points on ground potential. In this work, the state of the art on DC measurements in the high-voltage transmission grid is given, including the measurement in the transformer neutral point, the indirect measurement with the differential magnetometer method, and the indirect method of measuring a compensating current. In addition an optical current measurement system under development is presented.

KW - Neutral Point Measurement

KW - DC Bias

KW - Faraday-Effekt

KW - Current Measurement

UR - https://www.scopus.com/pages/publications/85178154156

U2 - 10.1109/UPEC57427.2023.10294963

DO - 10.1109/UPEC57427.2023.10294963

M3 - Paper

SP - 1

EP - 5

T2 - 58th International Universities Power Engineering Conference

Y2 - 29 August 2023 through 1 September 2023

ER -

DC Measurement in HVAC-Systems: Status Quo and Recent Developments

Abstract

Conference

UN SDGs

ASJC Scopus subject areas

Fields of Expertise

Treatment code (Nähere Zuordnung)

Access to Document

Other files and links

Fingerprint

FORESEEN - Fiber Optical Current Measurement

Cite this

DC Measurement in HVAC-Systems: Status Quo and Recent Developments

Abstract

Conference

UN SDGs

ASJC Scopus subject areas

Fields of Expertise

Treatment code (Nähere Zuordnung)

Access to Document

Other files and links

Fingerprint

Projects

FORESEEN - Fiber Optical Current Measurement

Cite this