Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count

Rahul Nadgouda; Herbert Hackl; Bernd Deutschmann

doi:10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331

Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count

Rahul Nadgouda
, Herbert Hackl
, Bernd Deutschmann

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Abstract

Filters and pulse shapers are widely used to reduce Electromagnetic Interference (EMI) by shaping the signal waveform. As the order of filter increases so does the silicon area requirement, which becomes an issue specially for low frequency applications. This paper outlines a methodology to implement a square wave shaper which approximates low-pass filter (LPF) characteristics using squaring circuits, with the aim of reducing component count for significant gain in silicon area. The shaper is analyzed in comparison to an ideal Bessel LPF and resulting differences are presented. Lastly, area savings are estimated and an outline of possible implementation of the shaper on schematic is presented.

Originalsprache	englisch
Titel	2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021
Herausgeber (Verlag)	IEEE
Seiten	783-786
Seitenumfang	4
ISBN (elektronisch)	9781665448888
DOIs	https://doi.org/10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331
Publikationsstatus	Veröffentlicht - 26 Juli 2021
Veranstaltung	2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe: EMC/SI/PI/EMC Europe 2021 - Raleigh, USA / Vereinigte Staaten Dauer: 26 Juli 2021 → 20 Aug. 2021

Konferenz

Konferenz	2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe
Kurztitel	EMC/SI/PI/EMC Europe 2021
Land/Gebiet	USA / Vereinigte Staaten
Ort	Raleigh
Zeitraum	26/07/21 → 20/08/21

ASJC Scopus subject areas

Signalverarbeitung
Energieanlagenbau und Kraftwerkstechnik
Luft- und Raumfahrttechnik
Elektrotechnik und Elektronik
Sicherheit, Risiko, Zuverlässigkeit und Qualität
Strahlung

Zugriff auf Dokument

10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331

Andere Dateien und Links

https://www.scopus.com/pages/publications/85118400310

Dieses zitieren

Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count. / Nadgouda, Rahul; Hackl, Herbert ; Deutschmann, Bernd.
2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021. IEEE, 2021. S. 783-786.

Publikation: Beitrag in Buch/Bericht/Konferenzband › Beitrag in einem Konferenzband › Begutachtung

Nadgouda, R, Hackl, H & Deutschmann, B 2021, Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count. in 2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021. IEEE, S. 783-786, 2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, Raleigh, USA / Vereinigte Staaten, 26/07/21. https://doi.org/10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331

@inproceedings{9fe57dcfff5f49d099c59e06a472a2ac,

title = "Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count",

abstract = "Filters and pulse shapers are widely used to reduce Electromagnetic Interference (EMI) by shaping the signal waveform. As the order of filter increases so does the silicon area requirement, which becomes an issue specially for low frequency applications. This paper outlines a methodology to implement a square wave shaper which approximates low-pass filter (LPF) characteristics using squaring circuits, with the aim of reducing component count for significant gain in silicon area. The shaper is analyzed in comparison to an ideal Bessel LPF and resulting differences are presented. Lastly, area savings are estimated and an outline of possible implementation of the shaper on schematic is presented. ",

keywords = "Electromagnetic Interference (EMI), Low-Pass Filter (LPF), Pulse Shaper, Square Wave, Squaring Circuit",

author = "Rahul Nadgouda and Herbert Hackl and Bernd Deutschmann",

year = "2021",

month = jul,

day = "26",

doi = "10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331",

language = "English",

pages = "783--786",

booktitle = "2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021",

publisher = "IEEE",

address = "United States",

note = "2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe : EMC/SI/PI/EMC Europe 2021, EMC/SI/PI/EMC Europe 2021 ; Conference date: 26-07-2021 Through 20-08-2021",

}

TY - GEN

T1 - Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count

AU - Nadgouda, Rahul

AU - Hackl, Herbert

AU - Deutschmann, Bernd

PY - 2021/7/26

Y1 - 2021/7/26

N2 - Filters and pulse shapers are widely used to reduce Electromagnetic Interference (EMI) by shaping the signal waveform. As the order of filter increases so does the silicon area requirement, which becomes an issue specially for low frequency applications. This paper outlines a methodology to implement a square wave shaper which approximates low-pass filter (LPF) characteristics using squaring circuits, with the aim of reducing component count for significant gain in silicon area. The shaper is analyzed in comparison to an ideal Bessel LPF and resulting differences are presented. Lastly, area savings are estimated and an outline of possible implementation of the shaper on schematic is presented.

AB - Filters and pulse shapers are widely used to reduce Electromagnetic Interference (EMI) by shaping the signal waveform. As the order of filter increases so does the silicon area requirement, which becomes an issue specially for low frequency applications. This paper outlines a methodology to implement a square wave shaper which approximates low-pass filter (LPF) characteristics using squaring circuits, with the aim of reducing component count for significant gain in silicon area. The shaper is analyzed in comparison to an ideal Bessel LPF and resulting differences are presented. Lastly, area savings are estimated and an outline of possible implementation of the shaper on schematic is presented.

KW - Electromagnetic Interference (EMI)

KW - Low-Pass Filter (LPF)

KW - Pulse Shaper

KW - Square Wave

KW - Squaring Circuit

UR - https://www.scopus.com/pages/publications/85118400310

U2 - 10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331

DO - 10.1109/EMC/SI/PI/EMCEurope52599.2021.9559331

M3 - Conference paper

AN - SCOPUS:85118400310

SP - 783

EP - 786

BT - 2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe, EMC/SI/PI/EMC Europe 2021

PB - IEEE

T2 - 2021 Joint IEEE International Symposium on Electromagnetic Compatibility Signal and Power Integrity, and EMC Europe

Y2 - 26 July 2021 through 20 August 2021

ER -

Square Wave Shaper with Filter Characteristics to Reduce EMI and Passive Component Count

Abstract

Konferenz

ASJC Scopus subject areas

Zugriff auf Dokument

Andere Dateien und Links

Fingerprint

Dieses zitieren